How to tie a ribbon on May 9 scheme. Do-it-yourself bow from the St. George ribbon: we disassemble the kanzashi technique. Tulips for St. George ribbon

The 360 TV channel tells why a bag or a car antenna is not the place for the Victory symbol.

Soon Victory Day, and the cities of Russia are already beginning to be painted in symbolic black and orange colors. The St. George ribbon can be seen everywhere - on car antennas, advertising banners and passers-by's bags. What is the code of the St. George ribbon and how to wear it correctly, read below.

A bit of history

"St. George Ribbon" - an action for the distribution of symbolic ribbons dedicated to the celebration of Victory Day. It has been held since 2005 on the initiative of RIA Novosti and ROOSPM.

But its history begins in 1769, when Empress Catherine II introduced the soldier's order of St. George the Victorious. They were awarded to military personnel who showed courage in the battles for their homeland. The two main colors symbolize the battle. Black is thick smoke, orange is the image of a bright flame.

The number of lanes is also no coincidence. The Order of St. George the Victorious had 4 degrees. So, the ribbon with three black and two orange stripes distinguished the highest award.

How not to wear the St. George ribbon on clothes?

Today, the award ribbon has become symbolic. However, it requires no less respect. Therefore, hanging it on a bag or tying it on your wrist, to put it mildly, is not correct. Also, do not place a ribbon on a headdress, tie it in your hair, stick it on your trousers, and, of course, on shoes.

How can you wear the St. George ribbon on clothes?

For those who want to hang a two-color symbol on their clothes - the ideal place is on the chest, near the heart. You can also fasten the ribbon on the shirt collar, but only on the condition that it does not fray in the wind, but is carefully pinned up with a pin. The most popular forms of fastening are a bow, an envelope, or such a loop with downward ends.

Where can and can't you mount the tape on the car?

For motorists and bicycle owners, a sign of disrespect would be to hang a ribbon on a wheel, a windshield wiper, or a doorknob. But in the cabin of the car, hanging a St. George ribbon is not forbidden, by the way, as well as on an antenna. But remember, as soon as you see that the ribbon is dirty or torn, immediately replace it with a new one.

Speculation on patriotism.

But there are completely indecent ways to use the St. George ribbon. In pursuit of high sales, advertisers attract attention to their promotions by any means.

Ribbons are casually tied around bottles of vodka. Not only is it an alcoholic product, but also a direct violation of the St. George Ribbon code, which states that bicolor cannot be used to promote goods and be used as an element of product packaging.

Or here's another: the symbolism of victory is used to attract buyers of dry rations.

Gratitude doesn't cost money

It happens that ribbons are sold for a symbolic 5-10 rubles. This is also a violation. Remember that St. George's bicolor on the streets of cities should always be distributed free of charge. If you are offered to buy a ribbon, tell the sellers about the code. It consists of 10 items. Below is its full content.

Code of the action "St. George's Ribbon"

The St. George Ribbon action is neither commercial nor political.
The purpose of the action is to create a symbol of the holiday - Victory Day.
This symbol is an expression of our respect for veterans, a tribute to the memory of those who fell on the battlefield, gratitude to the people who gave everything for the front. To all those thanks to whom we won in 1945.
"George's Ribbon" is not a heraldic symbol. This is a symbolic ribbon, a replica of the traditional bicolor St. George Ribbon.
It is not allowed to use original award St. George or Guards ribbons in the promotion. "George's Ribbon" is a symbol, not a reward.
"St. George's Ribbon" cannot be an object of sale.
"George Ribbon" cannot serve to promote goods and services. It is not allowed to use the tape as an accompanying product or as an element of product packaging.
"St. George Ribbon" is distributed free of charge. It is not allowed to issue a ribbon to a visitor of a trading establishment in exchange for a purchase.
It is not allowed to use the "George Ribbon" for political purposes by any parties or movements.
"George Ribbon" has one or two inscriptions: the name of the city / state where the ribbon was produced. Other inscriptions on the ribbon are not allowed.
This is a symbol of the spirit of the people who fought and defeated fascism in the Great Patriotic War.

people shared an article

The orange and black St. George Ribbon takes its name from the St. George Cross. It was founded by Catherine II in 1769 in honor of George the Victorious. It is believed that two colors and five stripes convey his life and death: according to legend, he died three times and was resurrected twice. In Russia, it is customary to wear the St. George ribbon before Victory Day.

It should be worn on the left side. The ribbon is not a style element, so it should be treated with special respect. It is a symbol of victory over fascism and should not be worn below the waist and in the hair.

There are several ways to tie a ribbon.

3.
Lay one end 40 cm long. Keep the rest of the tape in your hand. In the opposite direction, lay the next layer 25 cm long. Lay in a zigzag stepping back 3 - 5 cm. Leave the end 25 cm. Fix the middle. Cut the ends with a corner and burn.

4. A kind of bow. Fold 30 cm of tape in the form of a figure eight. Fasten the ends. Wrap a small piece in the center of the workpiece, secure. Fold two black ribbons 25 cm long in half and make the base. Attach the first piece to the top center. In the middle, you can attach a pin clasp, or use an old brooch.

5. How beautifully to tie a St. George's ribbon in stages with a flower. To do this, you need to cut seven pieces of 2.5 cm each. Connect the corners from the wide side, you get a triangle. Do the same on the opposite side. Fold the shape in half. Put the fold up and bend the corner to the place of the fold, do the same with the corner opposite. Secure everything with glue. Get a petal in the shape of a hexagon. Connect all seven petals in a circle, fastening with glue. Attach a bead in the middle.

6. A flower can be made quickly in another way. From a thick sheet of paper, cut out a circle the size of what the flower should be. Sew 20 cm of tape with a thread by hand and assemble. Glue on a circle, add a bead or an army button in the middle. Attach clasp at the back.

St. George's Ribbon has been a constant symbol of victory for many years. Few know its history and understand the importance of this attribute. Where to wear a St. George ribbon, how to tie it beautifully - you will find the answers in the article.

The wearing of a ribbon folded in the form of various shapes is gaining popularity. It is not necessary to purchase this symbol, you can tie the ribbon yourself on the eve of Victory Day.

How can you beautifully tie a St. George ribbon?

There is no difficulty in tying the ribbon yourself for the purpose of decorating clothes, a bag. You can even tie a ribbon on the car beautifully. Although it is becoming popular to decorate with a ribbon whatever you want, in honor of the memory of the heroes and as a sign of respect, attach the ribbon to the clothes on the left side. So you do not desecrate the sacred symbol, but show respect to the memory of the fallen. You can attach a ribbon by securing it with a safety pin or by making a brooch. You can purchase a base for a brooch or use a regular pin.

Several ways:

The loop
lightning
Letter M
butterfly
bow
Tie
star
rosette
Flower
You can make a kanzashi brooch from a St. George ribbon

How to tie a St. George ribbon

How to tie a St. George ribbon step by step

As mentioned above, tying the ribbon in a loop is the most common and easiest way. The main thing is that one end of the loop is slightly higher than the other.

St. George Ribbon

To get a lightning figure: Fold the tape in three
Pull the top end to the right

St. George ribbon - lightning

Ribbon in the form of the letter M: Fold the ribbon in half 2 times Pull the upper end to the right
Bottom - left

St. George ribbon with the letter M (May)

How to tie a St. George ribbon with a bow?

A classic bow can be easily obtained by folding 2 loops. Pin the middle with a pin, where the two ribbons overlap. If you tie a ribbon around the middle, wrap it with a thread or secure with an elastic band, then the bow will look more elegant.

St. George ribbon bow

For a more complicated St. George's bow, you will need 4 pieces of St. George's ribbon.

Cut pieces from the tape 18, 9 (x2), 5 cm long
Fold the long piece in half so that the joint is in the middle

With a 5 cm cut, wrap the resulting workpiece in the middle, closing the joint. Secure everything with glue or thread
In two identical segments, pull off one edge and cut the other with cloves
Attach the ends to the workpiece

George's bow

You can fold an interesting bow in the form of a man from 4 pieces of St. George's ribbon

Cut ribbons 24, 14, 10 and 7 cm long
Make a loop out of the longest ribbon
Roll the ribbons of 10 and 14 cm into a ring, press and lay on top of each other, securing with a pin
Wrap with a 7 cm ribbon at the point of attachment with a pin
Place the workpiece on the prepared loop
Fasten all the parts together with thread, glue gun or pins
You can decorate the center with a flower or a rhinestone

St. George ribbon bow

From a very long ribbon, you can make a chic bow:

Lay the end of the tape on the table (about 35-40cm)
Lay the tape on top of it in layers, make each row shorter by 4-6 cm on each side
Leave the end of the ribbon about 20cm long from the center of the bow
Secure the layers with a pin
Cut the ends in a zigzag and place in a corner

Gorgeous St. George ribbon bow

The figure-eight bow looks unusual, but making it is very simple:

Take a ribbon 25-30cm long
Fold the tape into a figure eight, fasten the edges
With a smaller ribbon, tie a figure eight at the junction, secure
From two black ribbons 20-25 cm long, fold a cross
Connect all the details

Bow from St. George's ribbon in the form of a figure eight

How to tie a St. George ribbon with a tie?

St. George Ribbon Tie

Such a tie looks beautiful and unobtrusive, especially on kids.

Wrap the ribbon around so that the right end is longer than the left
Lay the left end on the right, passing under it crosswise
Make another circular weave, forming a loop
Pass the right end into the loop formed, moving from the bottom up.
Pull it out of the loop, then thread it into the eyelet
Tighten

How to tie a tie from a St. George ribbon

The algorithm for tying a St. George ribbon is no different from tying a regular tie and amazes with a variety of knots. I suggest you familiarize yourself with several more complicated schemes:

How to tie a tie

St. George Ribbon Tie

How to tie a St. George ribbon with a star?

In order to make an asterisk from a St. George ribbon, you will need 5 pieces 6 cm long.

Sew the piece in half in the middle
Bend the segment to form a beam
Repeat the same with the rest of the segments.
Gather all the rays together and form an asterisk

Asterisk for Victory Day

You can make a bow, as described above (figure eight bow), from two segments connected by a cross. Place a star in the center of the bow - this way you will get a wonderful brooch

St. George ribbon brooch

To get a pointed star:

Cut 5 pieces of tape 6 cm long
Fold the piece in half and cut at an angle. As a result, you will get a trapezoid
Solder the cut points with a soldering iron or, in extreme cases, sew or glue them
Turn inside out
Repeat the procedure with the remaining four segments.

How to make a star from a St. George ribbon

Next, you can connect the rays with a soldering iron. Depending on which sides you connect the rays, you will get different versions of the star.

Star for Victory Day

A star from a satin ribbon looks beautiful. If you don't have a soldering iron, you can solder the ends with a lighter or over a candle flame.

Cut 5 lengths of 3.5cm and one - 11cm
Fold the short piece in half horizontally and solder one side
Unfold to make a corner
Fold the edge over to the next black line, repeat for the second edge.
Solder the end

Repeat the operation with the rest of the segments
connect rays
Fold a long segment with the letter L, after cutting the edges with cloves
Connect the parts, you can add some kind of decoration to the center

St. George Ribbon Star

Video: How to tie a St. George ribbon with a rose

How to tie a St. George ribbon with a flower, diagram

Prepare five pieces of St. George's ribbon 6 cm long and one piece 15 cm
Fold each short section in half
String all the petals on a thread and tighten it, forming a flower

How to make a flower from St. George's ribbon

Fold the long piece into an L
Sew the flower to the ribbon
You can decorate the middle with a rhinestone or a badge

How to tie a St. George ribbon on a car and on a bag?

St. George's ribbon is a symbol of victory, a tribute to the heroes, so keep an eye on its appearance. It is unacceptable to use a tape instead of laces or a collar for a dog or cat. If you don't want to attach the tape to your clothes, you can tie it around the handle of your bag, your car's antenna, or your rearview mirror.

How to tie a St. George ribbon on a car

How to tie a St. George ribbon on a bag

How to tie a St. George ribbon beautifully, video

babyben.ru

How to tie a St. George ribbon

The St. George ribbon is a symbol of honor and victory. Today it is customary to wear it only for the celebration of Victory Day on the ninth of May. But in fact, the history of the tape goes far into the past.

St. George's Ribbon is quite revered in the country. Putting it on on Victory Day, a person expresses his deep gratitude to the veterans of the Great Patriotic War for saving him from the Nazis and delivering his native land from the German invaders.

Today there are many ways to tie the St. George ribbon. The most popular are:

The loop. To implement the tying method, it is enough to take the tape and put one edge on the other so that a loop is obtained. It is important to remember that one edge of the tape should be longer than the other.
Check mark. This is one of the easiest ways to tie a ribbon. It looks perfect and looks very conservative. For implementation, you need to fold the tape in half. Next, you need to slightly push the edges of the tape. One end should be longer than the other.
Tie. In this case, you will need a non-standard length ribbon, as it will be tied with a tie around your neck.
Knot. For this method, it is enough to tie a knot on the ribbon itself. It is necessary to tie not very tightly for an attractive appearance.
Bow. With this method of tying, it is necessary to initially make a loop with a very wide opening. We mark the middle at the top and apply it to the junction. You can fasten with a pin or sew. You can try to glue it to the intersection.

These are the most common and popular methods of tying a St. George ribbon. For an attractive appearance of the products, burn the ends with a lighter so that they do not split.

A complex bow is a more difficult task for those who wish, but it is quite feasible. In this case, you may need two St. George ribbons of the same size.

To tie in a way, it is initially necessary to make a loop and sew the middle of the upper part with the base of the intersection. From the second tape you need a wavy product. Unfold the ribbon and starting from both edges, wrap them.

Attach by sewing. How many layers to make is decided directly by the person himself. The best option is to have three layers. This product must be hemmed under the main bow.

For beauty, decorate the junction of the upper base with the intersection with a brooch or sew on beads, sequins or glue rhinestones.

Where can I attach

To achieve an attractive appearance of the ribbon, it is not enough to tie it correctly. It is necessary to attach it in such a way that it is in the most visible place, but does not look defiant and does not catch the eye sharply. After all, this symbol of victory is an individual sign of respect and gratitude to the people who defended our native land.

Traditionally, the St. George ribbon is tied in a loop and attached to the chest with a pin. It is desirable to attach from the side of finding the heart.

It is important to remember that the St. George ribbon is not only a symbol of victory, it represents the prototype of the Order of St. George, it is highly undesirable to use it as an elastic band for hair or other items of the image.

The best option is to attach the tape directly to clothing. If there is no such probability due to damage to the product, tie a ribbon in the form of a bracelet on your arm.

It must be remembered that the St. George ribbon is a symbol and must be treated with great respect.

One way is to tie a St. George ribbon on the car. So a person symbolizes his gratitude for the opportunity to move freely around the country thanks to the actions of the defenders of the Fatherland.

Where not to tie a St. George ribbon

By tying a ribbon, a person expresses his gratitude to the veterans for the peaceful sky above their heads. Therefore, this piece of matter must also be treated with respect. You can not tie the ribbon in such images as:

On a bag or other items.
Use a ribbon of a similar color instead of laces for sneakers or other shoes.
Use as a rubber band.
To be tied completely imitating the presence of a belt at the waist.
Use as shoelaces or animal leashes.

The history of the St. George ribbon

For the first time the St. George ribbon appeared in the seventeenth century. In ancient times, it symbolized valor, courage and honor. Awarded for great achievements in the field of military operations.

The colors for the St. George ribbon were chosen personally by Catherine II. According to the story, orange means flame and fire, and black smoke during battle.

The history of the St. George ribbon implies the passage of stages:

Introduction of the Order of St. George by Great Catherine II. It is to her that the St. George ribbon owes such a unique color scheme.
After the introduction of this order, a special building was allocated for its award. This happened in the eighties of the seventeenth century.
In the eighteenth century, the order was awarded for military merit.
After the October Revolution, the ribbon disappeared for a while. It began to be replaced with ribbons with other colors.
In 1943, the government of the country restored the ancient traditions and appearance of the St. George ribbon. The most honorary medals and orders were attached to it.

After the Great Patriotic War, the St. George ribbon began to serve as a symbol of victory over the Nazi invaders. On its basis, medals received in combat were awarded.

The ribbon got its name because of the initial award of the order. After all, it was this title that was originally awarded for courage and bravery on a ribbon of this color.

In Ukraine and Russia, the mass use of this symbol of victory fell on the beginning of the nineties of the nineteenth century.

The St. George Ribbon has become a symbol of respect, it symbolizes gratitude for the years of war spent and human lives lost in the struggle for peace.

zheleznaya-lady.ru

How to tie a St. George ribbon

Despite the fact that even the organizers of the distribution of St. George ribbons offer to tie them on handbags, car antennas or wrists, it would be more correct to honor the memory of soldiers and show respect for veterans - to pin this symbolic sign on the chest from the side of the heart, so as not to desecrate it.

The St. George ribbon is most often fastened to clothing as a badge on the lapel. The easiest way is to fold the ribbon in the form of a loop or zigzag (the best option for a short ribbon) and pin it to the clothes with a safety pin, piercing the ribbon itself in the overlap area.

A simple bow from the St. George ribbon is easy to get from the previous version: fold the ribbon with a loop, as in the photo above, and then pull the top of the loop to the overlap (intersection) of the two ends of the ribbon and pin the center (the most multi-layered place of the bow) to the clothes with a pin. The center can be tightly wrapped with a thread (orange or black) vertically, then the bow will be more elegant.

Such a bow is already made from three pieces of ribbon. If you want the bow to be 15 cm wide and high, cut two 30 cm ribbons and one small one (its length should be twice the width with a small margin):

On one long ribbon, cut corners on both sides.
Scorch all raw edges of all pieces of tape with fire so that they do not “spread”.
Fold the second long piece in the shape of a circle (connect the edges from below with a slight overlap), flatten the middle of the tape so that it is exactly above the junction of the two ends. Sew with thread or use a glue gun to secure the workpiece.
Wrap the middle of the workpiece with a short piece so that the edges of the piece are connected on the reverse side, sew or glue the edges and fasten the elements together. It turned out the basis of the bow.
Fold the section with cut edges into an “L” shape and attach the top of the corner to the back of the bow.

Like the previous version, with minor complications, you can fold the St. George ribbon into a shape that vaguely resembles a little man. In this case, you will need two long ribbons of 45 cm or more and one short one, as in paragraph 3, singe all edges:

Fold a long ribbon into a circle, connect the edges from below.
"Flatten" the sides of the circle so that you get a "figure eight". Temporarily secure the contact point with a needle or pin.
Squeeze the "eight" vertically so that the top, the fastening needle and the junction of the edges are clearly under each other. Get a double bow. Baste or glue the connections, remove the needle.
Wrap the bow in the center with a short piece of tape, fasten the junction of the edges on the back of the workpiece.
Fold the remaining free long ribbon in a loop, as in step 1, and attach it to the back of the bow at the crossing point.

If the center of the bow in option 3 or 4 is slightly gathered up and decorated with a brooch, beads or a flower instead of a transverse ribbon, the bow will already look completely different.

An elegant bow from a long St. George ribbon can be made like this:

Lay the end 40 cm long on the table, hold the rest of the tape in your hand.
Lay the next layer in the opposite direction, measuring approximately 25 cm.
Fold the tape in a zigzag, shortening the side by 3-5 cm each time.
At the last stage, leave a "tail" 15-20 cm long from the center of the bow.
Secure the middle with thread or a safety pin.
Place the ends of the tape in a corner, secure in this position.
Cut the corners around the edges and singe.

An unusual bow, but it is done simply:

St. George's ribbon 30 cm long, fold the "eight", as in the photo, fix the junction of the edges.
Wrap the center with a short piece of tape, sew in the workpiece from the back.
From two black ribbons 25 cm long, fold the bases of the bows (the joint of the ends from the bottom in the center) and connect the blanks together with a cross.
On top of the black "cross" fasten a bow from the St. George ribbon.

St. George's ribbons can be decorated with a flower made using the "kanzashi" technique (more details here). Attach a pin for a brooch on the reverse side of the decoration from the St. George ribbon, you can buy them in the needlework department.

The St. George ribbon should be worn carefully and with dignity, because this is a way to express your respect for the warring generation of heroes, to feel a patriotic mood and pride in the Motherland!

sovetclub.ru

How to tie a St. George ribbon?

Not only veterans and officials, but also all townspeople are preparing for the upcoming May 9 holiday. Bright posters and signboards appear on the streets, stages for concerts are set up, everywhere we see festive symbols and a permanent attribute of the Victory Day - St. George's ribbons.

What does the St. George ribbon symbolize?

The St. George ribbon itself was established back in 1769, it was supplemented with an equilateral cross or star. Such an award was awarded only to the elect, who showed wisdom, honor, courage and patriotism.

The St. George ribbon was part of the highest military award - the Order of St. George. The specific color of the ribbon has not changed since then, 3 black stripes and 2 orange, the piping is also made in orange.

Orange and black were considered state colors, as they were used on the coat of arms of the time of Catherine II. These colors symbolize smoke and fire, death and resurrection, the struggle and difficulties that soldiers have to face in war.

For modern society, the decoration of clothes with a St. George ribbon symbolizes honor and respect for veterans, a tribute to the fallen wars.

Where to buy a St. George ribbon?

The main attribute of the Victory holiday is the St. George ribbon. A small piece of two-color fabric, only about 20 centimeters long, today is associated with Victory Day in the Great Patriotic War. Usually, on the eve of the holiday, volunteers distribute free ribbons to everyone in the central squares and stopping points. Those who were not lucky enough to get to the distribution can purchase tapes:

in kiosks ROSPRINT
at souvenir sellers on the day of the holiday
in fabric and sewing shops

The cost is low, from 10 to 30 rubles, depending on the conscience of the seller.

How to tie a St. George ribbon beautifully?

Despite the small size, there are many ways to beautifully tie a St. George ribbon. First of all, you should choose where exactly you want to attach it, to the lapel of a jacket, to a buttonhole, to a tie or bag.

Ways to tie a St. George ribbon

We offer you several common patterns for tying a St. George ribbon.

How to tie a St. George ribbon with a check mark: diagram

Fold the ribbon in half, tighten so that one end is slightly shorter.
Pull the short end up a little to form a loop.
Now use a pin to secure it to your clothes.
Folding the ribbon into a bow is also very simple, in fact you need to make two checkmarks, you don’t need to tie anything. It is enough to make two loops at an equal distance from the center.
Now fasten the ribbon to the clothes with a pin so that the bow does not fall apart.

How to tie a St. George ribbon with a bow with dressing?

Fold the bow according to the previous scheme so that it does not fall apart. You can tie the place of the crosshair with a thread or an elastic band.

How to tie a St. George ribbon with a big bow?

A complex ribbon bow will require a creative approach. First, cut the tape into 3 pieces, two pieces of 30 centimeters and one 5 centimeters.

At a long segment, connect the ends so that you get a vicious circle.
Fold the circle in half.
Wrap the middle with the shortest tape and secure the ends with a glue gun or sew.
Fold the second long piece in half and spread the ends to make a regular checkmark or letter "L". Attach the first blank to the top of the letter.

How to fold a St. George ribbon with an elegant bow?

For such a scheme, you will need a long cut about 1.5-2 meters long and a small piece about 40 cm long.

To begin with, put a short cut on the table, start laying the tape across it in a zigzag pattern, that is, each time reducing the length by 5 cm.
You can start at 25 cm and end at 5 cm with 4 moves in each direction.
At the end, throw the free end of the short cut through the middle of the workpiece and secure with pins or a glue gun.

How to fold a St. George ribbon with a zipper: diagram

Another original way is to fold the tape in the form of a zipper or an inverted Z. Laying should be done directly on the clothes on which you plan to attach the tape. You just need to fold the tape three times and spread the ends in different directions by 30 degrees. Now gently pin it to your clothes.

How else can you tie a St. George ribbon: photo

We offer you a couple more options on how to tie a St. George ribbon beautifully:

Where can not attach the St. George ribbon?

St. George's Ribbon is a symbol of respect and honor. Usually it is placed in the place where veterans wear their orders and medals, that is, on the left side of the chest, near the heart. Can be worn on the wrist.

It is unethical to place the St. George ribbon below the waist, on the head, on the dog's leash, on shoe laces.

Motorists can decorate the car by tying a ribbon around the antenna, mirrors or windshield wipers. It is also worth noting that any holiday, having begun, requires completion, so do not forget to remove the ribbons. From city dust and dirt on the roads, they quickly get dirty and look unattractive.

Preparations for the holiday and the holiday itself on May 9 are held in their own way for everyone: someone prepares photographs of grandparents for the immortal regiment, someone visits older relatives, most go for festivities in the city center or in nature. To make this holiday memorable for you and your children, spend it with dignity, say thank you to the veterans and visit the monuments to fallen soldiers.

Video: 10 ways to tie a St. George ribbon

St. George's Ribbon is quite revered in the country. Putting it on on Victory Day, a person expresses his deep gratitude to the veterans of the Great Patriotic War for saving him from the Nazis and delivering his native land from the German invaders.

Today there are many ways to tie the St. George ribbon. The most popular are:

The loop. To implement the tying method, it is enough to take the tape and put one edge on the other so that a loop is obtained. It is important to remember that one edge of the tape should be longer than the other.
Check mark. This is one of the easiest ways to tie a ribbon. It looks perfect and looks very conservative. For implementation, you need to fold the tape in half. Next, you need to slightly push the edges of the tape. One end should be longer than the other.
Tie. In this case, you will need a non-standard length ribbon, as it will be tied with a tie around your neck.
Knot. For this method, it is enough to tie a knot on the ribbon itself. It is necessary to tie not very tightly for an attractive appearance.
Bow. With this method of tying, it is necessary to initially make a loop with a very wide opening. We mark the middle at the top and apply it to the junction. You can fasten with a pin or sew. You can try to glue it to the intersection.

These are the most common and popular methods of tying a St. George ribbon. For an attractive appearance of the products, burn the ends with a lighter so that they do not split.

A complex bow is a more difficult task for those who wish, but it is quite feasible. In this case, you may need two St. George ribbons of the same size.

Attach by sewing. How many layers to make is decided directly by the person himself. The best option is to have three layers. This product must be hemmed under the main bow.

For beauty, decorate the junction of the upper base with the intersection with a brooch or sew on beads, sequins or glue rhinestones.

Where can I attach

Traditionally, the St. George ribbon is tied in a loop and attached to the chest with a pin. It is desirable to attach from the side of finding the heart.

The best option is to attach the tape directly to clothing. If there is no such probability due to damage to the product, tie a ribbon in the form of a bracelet on your arm.

It must be remembered that the St. George ribbon is a symbol and must be treated with great respect.

One way is to tie a St. George ribbon on the car. So a person symbolizes his gratitude for the opportunity to move freely around the country thanks to the actions of the defenders of the Fatherland.

Where not to tie a St. George ribbon

On a bag or other items.
Use a ribbon of a similar color instead of laces for sneakers or other shoes.
Use as a rubber band.
To be tied completely imitating the presence of a belt at the waist.
Use as shoelaces or animal leashes.

The history of the St. George ribbon

The colors for the St. George ribbon were chosen personally by Catherine II. According to the story, orange means flame and fire, and black smoke during battle.

The history of the St. George ribbon implies the passage of stages:

Introduction of the Order of St. George by Great Catherine II. It is to her that the St. George ribbon owes such a unique color scheme.
After the introduction of this order, a special building was allocated for its award. This happened in the eighties of the seventeenth century.
In the eighteenth century, the order was awarded for military merit.
After the October Revolution, the ribbon disappeared for a while. It began to be replaced with ribbons with other colors.
In 1943, the government of the country restored the ancient traditions and appearance of the St. George ribbon. The most honorary medals and orders were attached to it.

After the Great Patriotic War, the St. George ribbon began to serve as a symbol of victory over the Nazi invaders. On its basis, medals received in combat were awarded.

The ribbon got its name because of the initial award of the order. After all, it was this title that was originally awarded for courage and bravery on a ribbon of this color.

In Ukraine and Russia, the mass use of this symbol of victory fell on the beginning of the nineties of the nineteenth century.

The St. George Ribbon has become a symbol of respect, it symbolizes gratitude for the years of war spent and human lives lost in the struggle for peace.

The St. George Ribbon public action in honor of the victory in the Great Patriotic War was first held in 2005 at the initiative of the RIA Novosti news agency. This symbol appeared in the era of Catherine II, who established the highest military award of the Russian Empire - the Order of St. George. The RIAMO in Podolsk columnist found out how to properly wear the St. George ribbon and where not to attach it.

The history of the St. George ribbon

The St. George ribbon appeared in 1769 by decree of Empress Catherine II, who introduced the soldier's order of St. George the Victorious. It was a very honorable and prestigious award, it was received by military personnel for special bravery in battles. The colors of the stripes symbolized the battle: black - thick smoke, orange - bright flames. In the days of the Russian Empire, the ribbon was worn on the uniform, thrown over the right shoulder.

The ribbon is named after George the Victorious, an important Christian saint who, according to legend, performed many miracles and defeated the terrible serpent that devastated the earth. His feat is depicted on Russian coins and on the coats of arms of Moscow and the Moscow region.

The St. George Ribbon was used to design Soviet awards, including the Order of Glory and the medal "For the Victory over Germany in the Great Patriotic War of 1941-1945." She had five longitudinal stripes - three black and two orange.

In 2005, for the first time in the Moscow region, a public action "St. George's Ribbon" was held, organized by the news agency "RIA Novosti" and the regional public organization "Student Community". Since then, the action has been held annually not only in Russia, but also in other countries. St. George's ribbons have become a symbol of memory of the Great Patriotic War, the feat of veterans and the Victory.

Where to get a St. George ribbon

Photo of the site "George Ribbon"

Volunteers and activists start handing out ribbons a few days before the celebration of Victory Day. They can be found near metro stations, shopping centers, in squares and in crowded places. Anyone can get the tape for free.

How to wear a St. George ribbon

Alexander Kozhokhin

There are no official rules for wearing the St. George ribbon. However, it should be understood that this is not a fashion accessory, but a sign of memory, respect, grief and gratitude to the participants of the Great Patriotic War. Therefore, it is worth treating the ribbon with care and respect.

Basic ways

It is customary to wear the St. George ribbon on the chest on the left as a sign that the feat of Soviet soldiers will forever remain in the hearts of descendants. It can also be tied around the wrist, many attach the tape to a mirror or car antenna.

Eyelet

A simple and common option is to attach a St. George ribbon in the form of a loop. To do this, you need to cut off 10-15 centimeters of the tape, cross the ends in the form of the letter "X" and stab the middle with a brooch, pin or badge. Wear on the left side of the chest.

Bow

You can attach a St. George ribbon in the form of a simple bow. It can be tied in any usual way, the main thing is to straighten the knot, “ears” and the ends of the tape. You can also not tie the ribbon, but simply form two loops out of it and secure them in the middle with a pin or badge.

Bow figure eight

Take about 30 centimeters of tape, fold it into a figure eight, fasten it in the middle. Take a shorter ribbon and also fold it into a figure eight, fasten it. Next, you need to take two more tapes, each smaller than the previous one. You will get four ribbons of different lengths, folded in eights. Fold them on top of each other and fasten them with another ribbon. You will get a large, but discreet bow, which should be fixed on the left side of the chest.

Zigzag

St. George's ribbon can be attached to clothing in the form of a zipper or zigzag. To do this, fold the tape three times like an accordion and pull the ends a little to make the letter “N”. Pin or sew. Attach to clothing with a pin, brooch or badge.

Tie

To tie a St. George ribbon and a tie, you need a long ribbon. You can use any usual way of tying a tie. For example, wrap the tape in a circle so that the left end is longer. Put the right end on the left and cross it under it. Then wrap the ends again, forming a loop, into which we pass the left edge from the bottom up and pull it out of the loop, thread it into the eye and tighten.

Star

Alexander Kozhokhin

A more complicated way, but the result looks original and festive. You will need 5 pieces of tape 8 centimeters long. Fold each in half and cut at an angle, stepping back from the edge of 2 centimeters. Fold the cut sides to each other, fasten with fire - with matches or a lighter. Turn the blanks so that the seam is in the middle. Fasten them to each other with fire or a soldering iron - you get a star with a hole on the back. Next, fold the tape of standard length in the form of a checkmark and place a star on the fold, in the center of which attach a decorative element - for example, an icon. You can fix the decoration on clothes with a safety pin.

Chrysanthemum

Prepare flower templates and circle them on a wide ribbon. Large and small blanks are best cut with curly scissors. To make a petal, you need to fold the cut parts in the form of an accordion and steam with an iron. Then, drip glue onto the wire bent into a loop and put on the petals one by one, alternating large and small, as in a living flower. Such a chrysanthemum can be worn on clothes during Victory Day or used as a decor for a postcard to veterans.

With embroidery

In many schools, on the eve of May 9, schoolchildren embroider stars, flowers, dates, and inscriptions on St. George ribbons. For this, ordinary colored threads, floss, and special ribbons for embroidery are suitable.

What can not be done with the St. George ribbon

Attach tape to hair, shoes, pants;

Tie a ribbon on bags, backpacks, wallets;

Attach the ribbon to jewelry, watches, use as a necklace and accessory;

Attach too many ribbons to clothing;

Tie more than one ribbon on the machine;

Attach tape to animals and their clothes, use as a collar or leash;

Sell St. George ribbons.

Tatiana Vorontsova

When the celebration of Victory Day ends, you should not throw out the St. George ribbon. Ribbons left on the streets, thrown into the mud, thrown into the bins leave a painful impression and upset the veterans, and yet the action is aimed at ensuring that their feat is not forgotten.

It is best to remove the St. George ribbon until next year or wear it on special dates - for example, on the day the Great Patriotic War began or on the day the Battle of Stalingrad ended.