Everyone is waiting for New Year holidays as a miracle. Many new year appear, you want to go shopping and choose gifts for relatives and loved ones. Let's see with you, how, it is enough elementary, make new Year's gift. The main material that will be used for the manufacture of Christmas tree - sisal. Sizal is a natural fiber, which is obtained from the leaf of agave plants. Sizal can be bought at any store for creativity or in the Floristics Store. So we reserve the necessary materials and proceed to the creative process.
To work, you will need:
- green sisal,
- adhesive gun, glue rod,
- scissors,
- plugs
- disposable paper glass,
- cardboard,
- building gypsum,
- christmas balls,
- stamens dark green 8 pieces, raspberry stamens 30 pieces,
- beads
- decorative berries in Sahara 15 pieces,
- corrugated brown paper,
- rafia green
- christmas christmas balls small raspberry color.
First you should make balls from Sizal. To do this, we tear off a small piece of sisal and twist between the palms, like a plasticine.
In a cup, we smell the building gypsum, a little more than half, pour such a number of water that is indicated on the package. We mix well and retain dry.
While building gypsum dries, we make a cone from the cardboard.
Paper disposable glass is gluable with corrugated paper.
The cone is glued to the glass, the cone itself should be a bit of a larger diameter than a glass to stick the cone to the pot without any problems.
From Rafia tie a bow and glit to the resulting pot for the future Christmas tree, thereby we denote the facial part. Rafia is a palm plant, from the leaves of which they make raphy, it is widely used for decor. You can buy it in any floral store, or someone can stay from the bouquet of presented colors. It is not necessary to use Rafia at all, it can be replaced by a conventional satin ribbon.
Now that the design is fully assembled, and we decided on the front side of the following stage. We begin to glue the balls that we have arrived. Blind it is better to start the bottom so that the bottom of our Christmas tree was smooth.
Between the balls from Sizal, glit the Christmas balls.
Sizal balls and Christmas balls continue to glue until the entire cone is completely placed.
Cut off the tails from the stamens, leaving about 1.5 cm.
Stamens stick between sisal balls.
When all stamens are glued, we glue the berries in sugar.
Too part with berries no need, retreating, approximately equal distance from each other, glue the berries.
Now glue raspberry stamens.
On the balls from Sizal, we glue brightly raspberry beads with a diameter of 2mm.
That's all! All successful creativity. Create with love.
How else can you do christmas trees do it yourself, Watch in - many options!
Did you like the product and want to order the same by the author? Write to us.
Another interesting:
Look also:
Heat on the kettle "Santa Claus"
In order for the tea longer than the hot in the kettle, we will connect the crochet warmer in the form of Santa Claus, ...
Sweet gift "Winter house"
A gift from candy for the new year "Sweet house" on the eve of the wonderful and bright New Year holiday ...
With the onset of New Year holidays, each of us thinks about the Christmas tree. Green beauty can be bought and bringing to the house, dress up. And you can make with your own hands. In the latter case, options for a fantasy flight set: a Christmas tree can be a paper, wire made of rain or sewn from the fabric. We offer you another very unusual version of the New Year's tree - this is a hubby tree from the balls. It's not so difficult to make it, but it will hit guests and will remember for a long time. After the holiday it is easy to disassemble and save until next year.
Let's see what we need to make such an original New Year's miracle. Required materials and tools:
Round grille (the old grill is suitable);
New Year's Christmas balls;
Reliable wire;
Pliers and nippers;
About 2 chains;
Fastening and clips.
Photo 1 - Required Material and Tool
When everything you need is found, you can proceed to work. We start with the basics, for this reliably fasten the wire in several lattice places in such a way that small loops formed. It is necessary to ensure that the wire fastenings are symmetrical, otherwise the grille will bend. We divide the chain into 4 equal parts and with the help of the Karabinins fastened to the wire. The free ends of the chains fasten together at one point and also secure to the carbine.
Photo 2 - Basis for a suspended tree
Now that our base is ready, cutting the line for hanging balls on segments. It is better to make several types of blanks from a fishing line of different lengths. At the ends of the fishing line, we make a loop that can be securely secured with the clips. Then hang balls on the fishing line on the grille with hooks. If you have no hooks, you can use the deployed stationery clips.
Photo 3 - so the intermediate version should look like
In order for the composition from the balls to be beautiful and harmonious, do not hang balls chaotically. Experiment and pick up the picture, according to which you need to hang balls.
Photo 4 - Such a Christmas tree looks from all sides. Even below
That's all, our original pendant Christmas tree is ready. For it, you can use both the same balls of the same color, and completely different in the color and shape of Christmas tree toys. If you want to use unequal Christmas toys, it is desirable that they are only 2-3 different types. Such an interesting composition can not only replace the natural winter guest, but also become a supplement to it. In addition, this is a suitable option not only for an apartment or at home, but even for office or other workstation.
Photo 5 - Your beauty will delight you at least a real tree
Today we can make a stunning Christmas tree: she is soaring in the air and looks unusually stylish and unusual.
This is a great option for decorating an office or apartment in the style of High-tech.
Such a Christmas tree will fit into the ordinary house, giving the interior modern and, at the same time, a fabulous look.
You will need:
1. Round lattice stand with a diameter of 42.5 cm (you can buy it in the store of restaurant equipment and accessories).
2. Easy chain, intended for hanging lamps and other decorative purposes, - 152.4 cm.
3. Little carbine.
4. 100 hooks.
5. 1 mononi motor for jewelry (not drawn) - 15 m.
6. 200 jewelry crimping beads.
7. Crimper for crimping.
8. 100 hook straps.
9. 100 Christmas balls.
10. Ostrogubs.
Progress:
1. Cooking the basis: Take a stand-lattice.
I turn it over, remove the legs.
Now with the help of Ostrogubs, we attach the chain to the protrusions from the legs.
We connect the chains and hang to the carbine.
2. Now we calculate the length of the threads for hanging the balls.
In the master class, the balls with a diameter of 5 cm and 7.5 cm. Between these balls, the distance should be about 3.75 cm.
To accurately calculate the number of long, medium and short threads, you can use the following scheme:
Number of jewelry / balls (circles): 1, 7, 11, 15, 19, 23, 27
Fitting lengths in the center - 13.75 cm.
Circle 1: 18.1 cm, one - 22.5, two - 26.88 cm, three - 31.25;
Circle 2: two - 35.6 cm, two - 40 cm, three - 44.38 cm, four - 48.75 cm;
Circle 3: three - 53.1 cm, three - 57.5 cm, four 61.88 cm, five - 66.25 cm;
Circle 4: Four - 70.63 cm, four - 75 cm, five - 79.38 cm, six - 83.75 cm;
Circle 5: five - 88.13 cm, five - 92.5 cm, six - 96.88 cm, seven - 101.25 cm;
Circle 6: six - 105.63 cm, six - 110 cm, seven - 114.38 cm, eight - 118.75 cm.
The design must resemble a high narrow wedding cake (multi-tiered).
3. Place the hooks at the desired distance from each other.
4. Now cut off the pieces of monofilament of the desired length, we make loops and fix them with crimp beads.
Note: Keep the pieces of monofilament separately from each other so that they do not confuse. Finished segments with fasteners can be hung on the cornice, securing the ball at the bottom end.
5. Wipe the balls (starting from the central).
That's ready!
By the way, you can use not only green balls, but also transparent.
Or any other Christmas decorations. Such a Christmas tree looks original and beautiful!
And it is also easy to disassemble and hide until next new year. It will not take a lot of space, and the next year you can easily collect her again.
Translation of Ivanova Inna specifically for "sam-hand"
Christmas balls can be used not only for its intended purpose. Today we will tell you how to make one of them with our own hands. Very beautiful New Year's compositions: an unusual suspension ball with various elements, wreath, "grape bunch", a bouquet and even the christmas tree. We offer you several master classes, each of which is very easy to repeat.
Composition first: balloon ball
This decoration can be hung under the ceiling, on the door or on the wall, and also put in the center of the festive table. In addition, this is a great gift!
What do we need?
- five small plastic Christmas balls
- decorative straw or balls from threads
- satin ribbon
- shishki.
- christmas christmas bows
- any decor
How to do?
We take five Christmas balls and associate them with each other for threads (those that always come complete with balls).
In the center put a piece of foam or crumpled paper with the size of our balls. You can replace the ball that is not sorry.
So that the balls do not hang out, glue them to a single basis placed in the center. There we also glue and the balls from the decorative straw, which we previously shot.
You can additionally bore everything with a fishing line - it is not visible.
Cones, felt flowers, small figures, etc. Also "Usadim" on glue, conveniently attached them between the balls.
From above, all the composition decorate the ribbon, tolding it into the bow. The finished handicraft can be covered with a spraying in the form of an inlet or sparkles.
Composition Second: Christmas tree from balls
How to do?
In the hole, where thread is usually inserted, the net to the wire, and then tightly twist it so that it turns out a peculiar "stem." Additionally, wrap the resulting stems with a ribbon, which is better to fix with glue.
Make so many colors as you need: everything depends on the size of your vase and the number of fir branches.
Now just make a composition of the twigs and balls. Grab the base with a beautiful ribbon and install it in the vase. Ready!
And now, finally, the new year came to us! We all rush to decorate the New Year's Beauty - Christmas tree. And every year we buy many Christmas decorations, and especially balls.
But from the Christmas balls you can make a wonderful gift for friends and relatives. And while we, hurry to make the desktop Christmas trees from the balls or decorate the room.
I, as always, found several options at once for designing not only the desktop tree, but also compositions on the wall (window, door).
.jpg)
Christmas tree on the rod.
You can do this desktop tree with a child.
To do this, you will need:
- sustainable round base (coil from under ribbon, tape or gypsum base);
- rod (I take a long skewer);
- polyfoam (to strengthen the rod);
- packaging paper or postcard;
- christmas balls of different sizes (preferably several colors, but in tone);
- a small star;
- stationery knife or scissors.
We do the basis. The coil or any other base is wrapped with beautiful paper.
Insert the rod in the middle and fix it tightly.
.jpg)
Prepare balls. We split them in size. Now we ride the balls on the rod through the loop. Only first use large balls, and on the top are the smallest.
I attach a star to the rod peak and everything, our gift is ready!
Christmas tree on a cone.
Another simple version of the Christmas tree from the balls, I think - on the cone.
In its foundation there is a cardboard, a cone.
.jpg)
.jpg)
Balls will need to prepare. Remove all loops from them. In her place we apply glue (I use the glue gun, but superstar and superstar).
We start gluing a cone from below with large toys, then reduce their size gradually.
Figure Christmas tree, as is the color, can be different. You can stick with rows and spirals.
Such Christmas trees I give my guests along with. And at the entrance to the room with a festive table, every guest chooses "fate" himself, in the form of a small box
Flat Christmas tree.
This method is perfect for room decoration. I make it on the wall and in the kitchen on the doors.
Although it can also be a gift in the form of a picture! He decorated the room of her girlfriend, just did the Christmas tree in the framework.
Then, with the help of painting tape, I place a triangle for the Christmas tree. Balls attaching needles to wallpaper or narrow (double-sided) scotch tape to the painted surface.
Collect our peculiar Christmas tree starting from the top. Also, you can also use the garland, but without it, the decoration looks brightly. When all the balls are waved, do not forget to remove the greasy tape.
This Christmas tree can be used not only in the room, but also for.
Aerial tree.
But especially we like the tree, as I call it - "air".
But with her you will have to tinker a little. But later, it will be a tree of reusable. I keep it in the box, without disassembling.
The principle of such decoration - the balls hang in the air on the line in the form of a cone.
For such a Christmas tree, there will be a metal circle. At the top of the circle, you will fix four chains (the same length), we connect them together - you make the hook, for which we will be clinging the Christmas tree.
Still prepare:
- fishing line;
- pliers;
- hooks (but I just tie a fishing line to the base or toy);
- christmas balls of different sizes (quantity depends on the size of the Christmas tree).
Next, we carry out calculations. All toys will be clinging in a circle. On the outside there are large-sized toys on the longest fishing line. Then, approaching the center, reduce the length of the fishing line and the diameter of the balls.
As a result, a tree is obtained, as if soaring in the air, but at the same time - volumetric!
From personal experience, I want to advise you: Do not hang such a Christmas tree in the middle of the room. She is beautiful, but guests will have to go around her all the time to get confused in toys.
An ideal place for such a decoration is near the window or wall. I hang her on a chandelier near the wall, which is directed to the photo wallpaper. If you use glossy balls, then the light from the chandelier is beautifully illuminated.
I hope my experience will help you make original gifts and please the New Year's mood of all your guests!
Happy Holidays!