Knitting bags - knitting patterns and patterns. Crochet jute bag Description of further work

Dimensions:
Bag: width about 40 cm, depth about 23 cm, height (without handles) about 18 cm
Handles: 1 pair, about 61 cm long.

Knitting density: 12 loops x 15 rows = square with a side of 10 cm.

Materials/tools:
1. jute thread about 250 m, if you get a different knitting density, the number of threads will also change.

2. Hook 5 mm;

3. Rubber or silicone tube for handles (preferably);


4. Cord for handles
5. Needle with a large eye
6. Safety pins

Star Crochet Pattern

The pattern repeat is 2 chain stitches +1.
1st row: do 1 air. lifting loop and knit a row of st. b/n.
2nd row: dial 3 air. lifting loops, *make a yarn over, insert the hook into the second loop from the hook, grab the working thread and pull out a loop, then insert the hook into the next loop, the corner loop and into the first two loops of the initial chain, pulling a loop from each onto the hook. Then knit the elongated loops on the hook and knit one chain loop, repeat from * according to the pattern to the end of the row (look at the photo of the hook insertion point).



Star pattern in circular rows

1st row: cast on a chain of chain stitches, knit 3 chain stitches, make a yarn over, insert the hook into the first of 3 chain stitches, pull out a long loop, yarn over, insert the hook into the 1st loop of the chain chain loop, pull out the second long loop, Yarn over and insert the hook into the 3rd loop of the chain chain and pull out the third long loop. Grab the thread and knit together all the loops and yarn overs on the hook (7 in total) in one step, secure with two chain loops.
Yarn over, pull a long loop from the loop that closed the seven loops knitted together from the previous technique, yarn over, pull a second long loop from the chain loop from which the last loop of the previous technique was pulled, yarn over, skip one loop of the chain and from the next loops, pull out the third long loop. There are again 7 loops on the hook, knit them in one step and secure with two air loops. Repeat the last technique until the end of the row. Connect the last air loop and the third air loop (from the lifting ones) with a connecting post.
in the 1st row, pronounced half-stars were formed, the centers of which are located in the places from which the first long loop of each technique was pulled.
2nd row: from the loop of the previous row, knit 3 chain loops to rise, make a yarn over, insert the hook into the first of the 3 chain loops, pull out a long loop, yarn over, pull a second long loop from the center of the lower half-star, yarn over, pull a third long loop from the center the next lower half-star. There are 7 loops on the hook, knit together and secure with two air loops. Repeat the pattern of the first row, pulling long loops from the centers of the half-stars.
Knit the 3rd and subsequent rows similarly to the 2nd.From here

Everything is clear with the pattern. Let's start with the bag. First we knit the bottom:

See how the bottom is knitted.

The bag is knitted in the round, right side only.

Now let's make the handles:

First we make the middle of the handle. If you bought a tube that is too soft and can shrink when slightly squeezed, then for additional rigidity you can wrap it with cord, securing the edges with tape. Now you can accurately select the width of the knitted strip for the handles. We knit two strips with single crochets and make curves along the edges to attach the handles to the bag. We wrap the tube with a knitted strip and sew it, leaving the curves free, as shown in the picture on the left.

We secure the handle with a pin approximately 17-18 cm from the center, and carefully sew it on.

This is what our bag looks like:

Text, selection of patterns, materials and videos are mine: Irimed

Dimensions:
Bag: width about 40 cm, depth about 23 cm, height (without handles) about 18 cm
Handles: 1 pair, about 61 cm long.

Knitting density: 12 loops x 15 rows = square with a side of 10 cm.

Materials/tools:
1. jute thread about 250 m, if you get a different knitting density, the number of threads will also change.

Jute thread

2. Hook 5 mm;

3. Rubber or silicone tube for handles (preferably);

4. Cord for handles
5. Needle with a large eye
6. Safety pins

Star Crochet Pattern

The pattern repeat is 2 chain stitches +1.
1st row: do 1 air. lifting loop and knit a row of st. b/n.
2nd row: dial 3 air. lifting loops, *make a yarn over, insert the hook into the second loop from the hook, grab the working thread and pull out a loop, then insert the hook into the next loop, the corner loop and into the first two loops of the initial chain, pulling a loop from each onto the hook. Then knit the elongated loops on the hook and knit one chain loop, repeat from * according to the pattern to the end of the row (look at the photo of the hook insertion point).

Pattern \"Star\" in circular rows

1st row: cast on a chain of chain stitches, knit 3 chain stitches, make a yarn over, insert the hook into the first of 3 chain stitches, pull out a long loop, yarn over, insert the hook into the 1st loop of the chain chain loops, pull out the second long loop, yarn over and insert the hook into the 3rd loop of the chain of chain loops and pull out the third long loop. Grab the thread and knit together all the loops and yarn overs on the hook (7 in total) in one step, secure with two chain loops.
Yarn over, pull a long loop from the loop that closed the seven loops knitted together from the previous technique, yarn over, pull a second long loop from the chain loop from which the last loop of the previous technique was pulled, yarn over, skip one loop of the chain and from the next loops, pull out the third long loop. There are again 7 loops on the hook, knit them in one step and secure with two air loops. Repeat the last technique until the end of the row. Connect the last air loop and the third air loop (from the lifting ones) with a connecting post.
in the 1st row, pronounced half-stars were formed, the centers of which are located in the places from which the first long loop of each technique was pulled.
2nd row: from the loop of the previous row, knit 3 chain loops, make a yarn over, insert the hook into the first of the 3 chain loops, pull out a long loop, yarn over, pull a second long loop from the center of the lower half-star, yarn over, pull out third long loop from the center of the next lower half star. There are 7 loops on the hook, knit together and secure with two air loops. Repeat the pattern of the first row, pulling long loops from the centers of the half-stars.
Knit the 3rd and subsequent rows similarly to the 2nd. From here

Everything is clear with the pattern. Let's start with the bag. First we knit the bottom:

The bag is knitted in the round, right side only.

Now let's make the handles:

First we make the middle of the handle. If you bought a tube that is too soft and can shrink when slightly squeezed, then for additional rigidity you can wrap it with cord, securing the edges with tape. Now you can accurately select the width of the knitted strip for the handles. We knit two strips with single crochets and make curves along the edges to attach the handles to the bag. We wrap the tube with a knitted strip and sew it, leaving the curves free, as shown in the picture.

We secure the handle with a pin approximately 17-18 cm from the center, and carefully sew it on.

This is what our bag looks like:

If previously crocheted bags were relatively rare, in recent years the fashion has changed. Nowadays, many catwalks are firmly occupied by hand-knitted items, especially for jewelry and bags. Now the trend is a simple beach bag, a sack bag, a bag, a mochila, and so on. Crochet bags made of thick acrylic are very popular for every day. Knitted bags should not stretch much - it is better to crochet them using thick yarn and a hook that is not too thick. A DIY crocheted bag with patterns is a great option for the summer.

How to crochet a bag? The first master class with a description is designed for those who are not very good at crocheting. A crocheted beach bag for beginners, in which the openwork strip is repeated all the time - it’s not at all difficult. This crocheted bag made of yarn with acrylic in a simple style resembles a mochila in its shape. This summer crochet beach bag can be carried in your hand or slung over your shoulder.

To work you will need:

  1. Yarn 100% acrylic (100 m / 50 g) - 100 g each. blue, yellow and white.
  2. Hook 4.5 mm thick.
  3. Rope 95 cm long, 0.9 - 1 cm thick.

Cotton is also suitable for a summer handbag, but acrylic yarn is much lighter and cheaper. We take the knitting density: 18 p. / 7 r. equals 10/10 cm. We knit alternately all the time: yellow, white, and blue yarn.

Half column (PST): knit 1st r. VP, then we start with the 2nd row. insert the hook only at the rear. walls of section 1 of the river Each row begins with 2 VP lifts and ends with one half-column. in the second VP of the rise of the previous river.

Main (main) pattern:
The number of loops should be divisible by 5, plus two edge loops. Let's look at the diagram: repeating rapport of 6 points. Start with VP and end with it. We do it once from the first to the fourth rows, then repeat the 3rd and 4th rows. And then just knit the pattern with the 3rd and 4th rows.

Crochet bags are usually crocheted like this: first the bottom of the bag, then the top. It is better to knit from strong twine or nylon thread: this way the bottom will be solid and stronger. You can knit this pattern:

Or like this:

Or any structural one. We begin to knit the bottom with yellow yarn from a chain of 18 VP and 2 VP rises. To make the shape of the bottom beautiful, add 1 PST on both sides at a distance of 2 cm from each other. The total should be 22 sts. We knit with a pattern of 33 cm. Next, after 33 cm from the beginning of knitting, decrease 1 pst on both sides in two rows. As a result, there should be 18 stitches left. We finish the bottom 38 cm from the beginning of knitting.

You can make a semicircular bottom like this in a circular row. from SSN.

Choose any option.

We knit the walls

For the top of the bag, we tie the edges of the bottom with the main pattern (see the alternation of colors). Beginning of the river should be in the center short. sides.

1st row: perform 33 repeats (198 sts) + start and end sts.

Pens

We need the knitted handles for the bag to be non-stretchy - the best option is to insert a thick cord or rope into the handle fabric. Using yellow yarn, make 1 chain of 9 VPs and 1 VP rise. We carry out p. RLS, despite the fact that each subsequent p. start with 1 add. initial VP. We finish 1 sc in the 1st sc of the previous row. We finish knitting after 47 cm from the beginning. We cut the rope into two parts, insert it into the knitted strips of the handles and sew them along. We sew the base of the handles to the wrong side of the product so that the distance between the handles is 19-20.5 cm.

Knitted bags are very popular now. I present to you a master class on knitting such a bag from nylon threads, thick acrylic yarn, and even from garbage bags. If you take black bags and , then you will get a bag made from crocheted bags, and no one will guess that such a bag is made from garbage bags! Knit yourself a cool thing - diagrams and descriptions are included.

Nylon, cotton, jute threads of any colors are suitable for this handbag. The pattern is called curvy columns. Look how cool knitted bags look:

In this model we will need one, or better yet 2 thin straps for the handles - they are cut, pierced with an awl and sewn with threads to the handbag. Each strap has a length of 65-67 cm. Let's begin our master class.

To work you will need:

  1. Yarn (nylon, bags, threads, jute).
  2. Metal hook 3.5 mm thick.
  3. Hand strap.
  4. The pin is colored.
  5. Fabric for lining (any).

To tie the bottom, you need to dial 43 VP. The bottom is knitted in the round, in the pattern you end up with 9 rows of sc (dc/no)

We begin to make the bottom of the product: we tie 43 VPs in a circular sc.

We make increases in the corners (in pink in the diagram). The video below will help you tie the bottom.

The end result is the bottom of the product. For those who don’t understand, there is a video below from the author, everything in it is detailed and clear.

And one more bag for the summer, however, if you knit it from dark yarn, it will be quite suitable for autumn. It is very easy to knit, it is all made with sc. First you need to knit the solid bottom, and then the walls of the RLS.

We knit the bottom in a circle, following the arrow in the diagram. Knit 12 rows according to the pattern. The result should be 66 sts. The bottom will look like a round bowl.

And this simple diagram shows how to knit the main part from RLS. The video from the author shows everything in more detail, and although the language is Japanese, it is not difficult to understand.

On video: detailed crochet of a small summer bag.

Dimensions:

Bag: width about 40 cm, depth about 23 cm, height (without handles) about 18 cm
Handles: 1 pair, about 61 cm long.

Knitting density: 12 loops x 15 rows = square with a side of 10 cm.

Materials/tools:
1. jute thread about 250 m, if you get a different knitting density, the number of threads will also change.

2. Hook 5 mm;

3. Rubber or silicone tube for handles (preferably);


4. Cord for handles
5. Needle with a large eye
6. Safety pins

Star Crochet Pattern

The pattern repeat is 2 chain stitches +1.
1st row: do 1 air. lifting loop and knit a row of st. b/n.
2nd row: dial 3 air. lifting loops, *make a yarn over, insert the hook into the second loop from the hook, grab the working thread and pull out a loop, then insert the hook into the next loop, the corner loop and into the first two loops of the initial chain, pulling a loop from each onto the hook. Then knit the elongated loops on the hook and knit one chain loop, repeat from * according to the pattern to the end of the row (look at the photo of the hook insertion point).



Star pattern in circular rows

1st row: cast on a chain of chain stitches, knit 3 chain stitches, make a yarn over, insert the hook into the first of 3 chain stitches, pull out a long loop, yarn over, insert the hook into the 1st loop of the chain chain loop, pull out the second long loop, Yarn over and insert the hook into the 3rd loop of the chain chain and pull out the third long loop. Grab the thread and knit together all the loops and yarn overs on the hook (7 in total) in one step, secure with two chain loops.
Yarn over, pull a long loop from the loop that closed the seven loops knitted together from the previous technique, yarn over, pull a second long loop from the chain loop from which the last loop of the previous technique was pulled, yarn over, skip one loop of the chain and from the next loops, pull out the third long loop. There are again 7 loops on the hook, knit them in one step and secure with two air loops. Repeat the last technique until the end of the row. Connect the last air loop and the third air loop (from the lifting ones) with a connecting post.
in the 1st row, pronounced half-stars were formed, the centers of which are located in the places from which the first long loop of each technique was pulled.
2nd row: from the loop of the previous row, knit 3 chain loops to rise, make a yarn over, insert the hook into the first of the 3 chain loops, pull out a long loop, yarn over, pull a second long loop from the center of the lower half-star, yarn over, pull a third long loop from the center the next lower half-star. There are 7 loops on the hook, knit together and secure with two air loops. Repeat the pattern of the first row, pulling long loops from the centers of the half-stars.
Knit the 3rd and subsequent rows similarly to the 2nd.From here

Everything is clear with the pattern. Let's start with the bag. First we knit the bottom:

See how the bottom is knitted.

The bag is knitted in the round, right side only.

Now let's make the handles:

First we make the middle of the handle. If you bought a tube that is too soft and can shrink when slightly squeezed, then for additional rigidity you can wrap it with cord, securing the edges with tape. Now you can accurately select the width of the knitted strip for the handles. We knit two strips with single crochets and make curves along the edges to attach the handles to the bag. We wrap the tube with a knitted strip and sew it, leaving the curves free, as shown in the picture on the left.

We secure the handle with a pin approximately 17-18 cm from the center, and carefully sew it on.

This is what our bag looks like:

Knitted items are always in trend, especially if they are knitted bags. They knit bags with their own hands from everything: yarn, thread, jute, cord, twine, and even plastic bags. If you are at least a little friendly with knitting needles, you will no longer have problems with patterns - make yourself summer bags, as well as knitted handbags with knitting needles for autumn and winter. For those who find it difficult to knit on circular knitting needles, work on regular ones; at the end, when assembling, everything can be sewn with a large needle and thread to match the color of the product.

This cool fashionable bag will fit everything you need: it can be used as a beach bag, sports bag, or for a trip out of town. The work is not difficult, and this model can be used as a knitting bag for beginners. It uses a two-color pattern, 2 carabiners, and a strap made of the same yarn.

Bag size - height 28.5 cm, circumference - 74.5 cm.

To work you will need:

  1. Yarn (cotton or acrylic 100 m / 50 g) - 240 g. sea ​​green yarn, 200 gr. beige.
  2. Knitting needles 5.5 mm thick.
  3. Knitting needles 3.5 mm thick. (5 pieces.)
  4. Circular knitting needles 5.5 mm. 55 cm long.
  5. Hook 4 mm. (Not necessary).
  6. Two carbines.

It uses garter stitch and a pattern with elongated loops. The arrows on the pattern indicate where to start knitting.

  • Garter stitch: very simple knitting - knit all rows only with facial loops.
  • Circular rows: one circular r. one knit, and one circle. R. - purl.
  • Bands A: alternate 4 p. beige yarn and sea wave.
  • Bands B: alternate 2 circles. a row of beige and sea green.
  • Knitting density: 16 p. / 29 rub. in the round - 10/10 cm, knit in simple garter stitch. 16 p. / 33 rub. in the round - 10/10 cm, knit in a pattern with elongated sts.

Pattern with elongated loops

We knit according to the pattern in circular rows, repeating rapport constantly. Rapport is 10 sts. The circle is repeated. R. from 1st to 20th, the color of the yarn is indicated next to it.

Knitting the bottom of a bag

The bottom and the entire bag must be knitted with double thread. Cast on sea green yarn on 5.5 mm thick needles. 30 p., first p. - purl, and then - garter stitch. Knit like this 18.55 cm (54 r.) from the beginning, do not close the loops - they can be transferred to additional stitches. knitting needle

Side detail of the bag

We switch to circular knitting needles. A sea green thread on a circle. sp. First we knit 30 stitches with knit stitches, and then on all three sides of the square bottom we cast on another 30 stitches. The total will be 120 stitches. We close the knitting into a ring, mark the beginning of the circle. R. (Side), and knit 9 cm (24 rounds) in garter stitch. according to the designation of Lanes A. Next, we make the 40th circle. R. (12.5 cm) pattern with elongated loops. Then we do 24 circles. R. handkerchief mating according to the designation of Stripes B.

At this time, after 3 cm (8 circles) from the end of the pattern with elongated loops, make 1 circle for the holes into which the cord will be threaded. R. - *K2, 2 stitches together, 1 yarn over, and from * there is a constant repeat. Track. R. - purl.

After 88 laps. R. from the beginning of knitting the side part (29 cm) - close all the loops of the faces.

Strap

Our strap will not be too thick, but not thin either - knit it tighter without loosening the thread too much. Beige yarn in 1 thread is cast on knitting needles of thickness. 3.5 mm. - 16 sts, divide 16/4 sts into 4 knitting needles, make a ring and knit. satin stitch After 78 cm, close the stitch - the strap is ready.

Design of a sack bag

You can make belt loops both on knitting needles and by crochet. To work with a hook over the side of the bag (at the beginning of the circle), fasten a double thread, and make 12 VP and 1 SS in the 1st VP, turn around and make 14 SC around the VP ring. We fasten the thread. 2nd - also.

Using knitting needles, make 2 loops by casting 8 sts on 4 knitting needles and dividing them into 2 sts. We knit them like a strap, close the sts, and sew them to the product.

Thread the ends of the strap into the long loops of the carabiner and sew up the ends.

From 4 sea green threads we twist a lace about 85-89 cm and thread it through the holes. It should be tied in the middle of the loops. Make 2 pumpons and attach to the ends of the lace. Fasten the strap with loops.

How to knit a boho bag with knitting needles? Very simple - a summer bag with a description, with a cord over the shoulder - the second in our parade of bags. As you know, it is now fashionable to decorate such bags or trunks with tassels, pom-poms, or simply pendants. You can also decorate this trunk bag, although it looks good in its original form. Any bucket bag is in trend now. The handbag measures 39/30 cm. The knitted bag is all made with double thread. The top is tightened with a cord.

To work you will need:

  1. Yarn cotton or cotton with acrylic (120 m/50 g) 250 gr. white, 130 gr. orange and 100 gr. yellow, green and purple.
  2. Knitting needles 4 mm thick.
  3. Big needle.
  4. Auxiliary knitting needle.
  5. The cord is ready-made or woven from orange yarn.

Boho pattern and bags.

Knit with this sequence of colors: first 4 p. orange yarn, then 2 p. pattern - yellow, white, green, purple - constantly repeating.

Knitting density: 22 p. / 19 r. = 10 / 10 cm. We start knitting a bag with knitting needles from the valve (in the direction of the arrow).
Getting started: using orange yarn, cast on 88 sts on knitting needles 4 mm thick. We knit the entire row. purl. Next, knit the bag pattern.

Bag pattern

Every r. we start and end with an edge stitch. The number of stitches must be even.
1st p.:* Cross 2 sts to the left like this: leave one st for auxiliary. knitting needle before work, next. we knit knits., and p. with auxiliary. we knit knitting needles. *, repeat all the time from* to*

2nd row: 1 purl*, 2 stitches crossed like this: first we knit the 2nd stitch in front of the 1st purl stitch, while the stitch remains on the left knitting needle, then we knit the 1st stitch purl. and then lower both stitches from the knitting needle, repeat constantly from *, and finish 1 purl. First and second r. repeat constantly. Here is a pattern of two rows.

If this pattern is difficult for you, simply knit with knit stitches, or look online for lazy jacquard patterns.

Description of further work

So, we dialed the required number of stitches (88), and knitted r. purl Continue working the pattern according to the color of the yarn. After 142 rows (72 cm), we put 30 sts on the knitting needles on both sides. The result is 148 sts. Knit 201 r. (102 cm) and bind off all loops. Crochet the bag flap, or pick up a st along the edge of the flap and knit 4-5 r. garter stitch - close the stitch and hem the edge of the edging inward.

We sew the bag, combining the same icons. For two handles, use orange yarn to cast on 5 sts on two knitting needles and knit both parts, this is how handles for a bag are made:

Knit 83 cm long and bind off the loops for the handles. Pass the cord through the marked places and sew its ends. It would be nice to sew in a lining, having previously lined the walls of the bag with dense material. The knitted bag is ready.

How to knit a bag for autumn-winter? No problem! A mochila bag with knitting needles with Norwegian patterns can be knitted in a few evenings. Description and pattern included. Product size: 32 / 26.5 cm.

To work you will need:

  1. Wool yarn with acrylic (55 g/110 m) - black 3 skeins, pale pink, orange, blue and dark blue - 1 skein each.
  2. Knitting needles 4 mm thick.
  3. Circular knitting needles 3.5 mm. and 4 mm. (55 cm.)
  4. Thick cardboard or plastic 21.5/9 cm for the bottom.

Knitting density: 24 p. / 31 r. there will be 10/10 cm faces. satin stitch on 4 mm needles. The trunk bag is made with a very tight knit.

  • Facial surface- 1st r. knit persons, 2nd r. - purl, and so on all the time.
  • Jacquard pattern: persons satin stitch exactly according to this pattern:

We start knitting on 4 mm knitting needles, cast on 44 stitches with black yarn, and perform the knit stitch. bottom of the bag. We work until the width reaches 8.5 cm. We leave 44 sts for auxiliary. knitting needle Then you need to switch to 4 mm circular knitting needles. We cast on 20 sts on one side of the bottom, cast on 44 sts on the other, 20 sts on the third side, and plus our 44 removed loops from the auxiliary. knitting needles The total should be on circular knitting needles. 128 p.

Garter stitch: Row 1: knit, Row 2: knit.

We finished the jacquard, change the yarn to black, then - 2 p. persons stitch, then - in an openwork row: 2 stitches together, 1 yarn over, 2 stitches together, 1 yarn over, and so on until the end of the row.

Valve

For the valve we need 43 sts. Next, we knit faces. stitch the valve, and close the remaining 88 stitches. Then we knit 10 rows with black yarn, then we make a jacquard. pattern (indicated in red), then again 10 rubles. black yarn. In the last 10 r. make the valve round: decrease 1 p. in the last 3 p. Edging: inside out. We draw the sides into a circle. knitting needles 3.5 mm. on all sides of the valve. We do 5 rubles. persons ch., close the stitch, sew the roller in 4 places to make it look neater.

Strap and ties

Cast on 3.5 mm needles. 14 sts and make faces. Ch. The belt is the right length. Sew to the bag. The tie can be twisted or braided with black yarn, then passed through the holes into the openwork. R. Don't forget to put cardboard on the bottom of the product.

Knitting a jute bag is a bit difficult. Such bags will come in handy for a store, or a trip to the country: you can knit them into a voluminous one so that a lot of things can fit. Here are 2 options for a jute bag: one with a slotted handle, the other with a sew-on handle and a narrow strap trim. Both are good and comfortable. No laces are needed: a combination of garter stitch and stockinette stitch - it looks embossed and excellent! Knitting from jute is difficult; you need to use strong, preferably steel, knitting needles.

Such bags are convenient because they do not lose their shape: they remain the same rectangular, no matter how much food or things you put in it. Can be used as a beach bag. We offer you a pattern for these two jute bags.

And here is the second bag, the leather handles are sewn from the inside out, they need to be sewn deep so that they don’t pull on the top, the trim is with a strap. Rivet finishing. When washed, the bag becomes tanned, such washing is not easy, it takes 2 days to dry outside.

There are 2 ways to make “yarn” from garbage bags or polypropylene T-shirt bags; in the first case, you cut the bag like this:

There is another way to prepare “yarn”: fold the bag, cut off the handles, and cut into strips, 1-2 cm short of the fold (similar to a comb).

Then we straighten the bag and cut it now diagonally. Similar to cutting yarn from T-shirts.

Knitting bags from plastic bags is not difficult, and most importantly, it is not expensive. It is better to take a simple shape of the bag, for example the one from the previous description of a jute bag. You can knit with stockinette and garter stitches, with a cut-off handle, or take a 2-3-color pattern from different colored bags, the shape of the bag is rectangular, you can take this shape as a basis.

And the sides can be made according to this scheme:

Cool bags with a pattern

Cool knitted bags with knitting patterns and description. I hope you enjoy these cool handbags with patterns. Knit from any suitable threads, according to the patterns. Handles from the same yarn. Knitting patterns and pattern are included.